Plasma-Therm is a global manufacturer of plasma etch, deposition, and advanced packaging equipment for the specialty semiconductor and nanotechnology markets.

The Vision 320 RIE provides etch capability for R&D, prototyping, and low volume production. This parallel-plate capacitance based systems is found in applications that include fundamental material studies, surface modification, semiconductor device fabrication, and failure analysis involving delayering. 

This system, found in both academic and industrial environments, is a result of their small footprint along with robust construction that focuses on ease of use and low maintenance. The Vision systems satisfy the high reliability requirements for critical applications such as delayering where production is dependent on constant input from the Failure Analysis department. Being outside of the fabrication process, means that the system must have turnkey operation for non-etch process oriented engineers.

PLASMATHERM

Vision 320

The Vision 420 RIE provides etching capabilities over a variety of materials and substrates for non-caustic etching (primarily Fluorine based). The small footprint, low cost, ease of use and superior performance makes the Vision 420 an ideal candidate for a wide range of uniform, high quality films serving R&D, prototyping, pilot line and low volume production. The high volume loading allows production for numerous applications such as LED, MEMs, and wireless manufacturing

The 420 is found in production lines, universities and R&D labs worldwide. The reliable hardware and easy to use CORTEX® operating software makes the Vision 420 ideal for researchers and production alike. The extensive experience and large process library enable the users to ‘hit the ground running’ for any RIE etching requirement.

Vision 420

DSB-6000

Gen 3

Batchtop VII 

SLR-7701 ICP

Apex SLR: ICP-Etch
-Ideal for small volume production and R&D. Small footprint design
-Load lock method, manual load specification
-Adopts 2MHz ICP source. Improved etching rate and uniformity with high-density plasma
-ICP source section can be opened and closed 90 degrees for easy access to the lower electrode, and equipped with a slide mechanism for easy turbo pump replacement.
-Independent control of plasma density and bias possible
-Compatible with chlorine-based etching applications
-Compatible with various end point detection methods

APEX SLR

PINNACLE

7000

VERSALOCK

The Plasma-Therm 790 series is a self-contained Reactive Ion Etching (RIE) system that features a showerhead gas distribution system and a water-cooled RF platen. This system is capable of etching silicon, silicon dioxide, and silicon nitride. The chamber can achieve a base pressure in the range of 3x10-5 Torr and can operate within a pressure range of 10mTorr to 100mTorr. The system is controlled by a PC and offers both manual and automatic operation modes. It has four process gases available: CF4, CHF3, SF6, and O2.

SLR 720

"The PLASMA-THERM VERSALINE ICP is an Inductive Couple Plasma (ICP) etch platform that has been developed over decades of technological evolution at Plasma-Therm®. It offers high flexibility for application-optimized processes, with a large library of processes for a variety of applications, including wireless, photonics, power devices, compound semiconductors, memory, quantum, and advanced packaging. The platform can handle a wide range of materials, including II-VIs and III-Vs, silicon-based materials, dielectrics, polymers, metals, metal oxides and nitrides, and piezoelectrics. It also supports corrosive chemistry with corrosion-resistant components.
The hardware of the VERSALINE ICP is flexible and configurable, with options for handling cassette cluster systems or single-substrate loadlocks. It features a 2MHz ICP source that is heated for process stability and decreased first wafer effects, as well as increased MTBC. The substrate bias can be 13.56MHz or an optional 40MHz, and the substrate temperature can be controlled with backside helium using mechanical or electrostatic clamping. The platform also offers application-specific substrate electrode temperature ranges. The VERSALINE ICP is controlled by the Cortex control system and supports the EndpointWorks program for laser, optical emission, and other system parameter-based endpoints."

PLASMATHERM

Overview

Active Listings

Total Products

Services

Top PLASMATHERM Dry / Plasma Etch

DSB-6000

Vision 420

Vision 320

APEX SLR

List it with Moov and find the perfect buyer in no time at all.

All PLASMATHERM Dry / Plasma Etch